Performance
Rated power: 18W
Module efficiency: 5%-6%
Nominal voltage: 12v-13v
Warranty: 80% minimum warranted power output over 20 years
Configuration
SCO-218
Universal frame with an accessible junction box for cable connection
Qualification Test
Parameters
Temperature cycling range: -40oC to +85oC for 200 cycles
Damp heat test 85oC and 85% relative humidity 1000h
Front & rear static loan test (eg: wind) 2400pa
Front loan test (eg: snow) 5400pa
Quality & Safety
Manufactured in ISO 9001 certified factories
Warranted minimum power: 18W
Voltage at Pmax (Vmp): 17.5V
Current at Pmas (lmp) 910mA
Short circuit current (lsc) 1200mA
Open circuit coltage (Voc) 25V
Temperature
coefficient of Isc (0.08+0.02)%/oC
Temperature coefficient of Voc -(0.34+0.04)%/oC
Temperature coefficient of Pmax -(0.19+0.03)%/oC
NOCT2 43+2oC
Maximum series fuse rating 20A
Mechanical characteristics
SCO-218
Dimensions 4’t x 1’.25"w x 1"thick
Weight 16.75lbs.
Frame Clear anodized aluminum - color: silver
Junction box With 4 terminal screw protection connection block, cable fittings accepting 2.5-6mm
diameter cable. Terminals accept 1.5 to 6mm2 AWG wire.
Diodes Construction
One 9A 45V schottkey by-pass diodes included Front: high transmission 3mm glass
Rear: 3mm glass
Encapsulation: EVA
One 9A 45V schottkey by-pass diodes included Front: high transmission 3mm glass
Rear: 3mm glass
Encapsulation: EVA
1, Standard test conditions
(S.T.C.), irradiance of 1000W/M2 at an AM 1.5G solar spectrum, and ace; temperature of 25oC
